HP StorageWorks 6000 - Virtual Library System, User Manual

Page: 295 / 358

2. Remove the processor heatsink.
Figure 134 Removing the processor heatsink
.
3. Open the ZIF socket lever and remove the processor.
Figure 135 Removing a processor
.
To replace the processor:
1. Open the ZIF socket lever. Be sure the lever is in the fully open position.
2. Set the processor into the ZIF socket, and hold it in place while closing and latching the socket
lever. Verify that the processor is fully seated in the socket.
CAUTION:
Failure to fully seat and latch the processor in the ZIF socket might result in damage to the
processor and/or processor memory board.
HP StorageWorks 295