HP Designjet 330, User Manual

Page: 52 / 184

2–12
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–12 (seq: 52)
This is the black on page 2–12 (seq: 52)
7
IMPORTANT. While keeping the right-hand side aligned with the line of
holes, push the sheet in one swift and decisive movement up into the entry slot.
Try to keep the angle of the sheet the same as the angle of the slot.
Three things will happen in quick succession:
1 You will feel the sheet come up against the
media stops.
2 The sheet may buckle slightly, as you are still
pushing it. This is normal.
3 The plotter will start to take the sheet from
you.
At this point, let go!
Don’t touch the sheet
while the plotter feeds it
out again a short way, as
this would probably
misalign it.
X
1750
Localization Note. This page very similar to Parrot Load Media Flier (Job #188)
Working with media
Loading sheet media