HP Designjet 330, User Manual

Page: 72 / 184

This is the green on page 2–32 (seq: 72)
2–32
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–32 (seq: 72)
This is the black on page 2–32 (seq: 72)
2
1 If the plotter has finished the series of
plots and you want to cut the roll after
the last one, press
Form Feed
and wait
for the plotter to feed out more media.
Before cutting the roll (as explained next),
make sure that no other plot has been sent
to the plotter.
2 Holding the media taut on the left,
adjacent to the cutter, slide the cutter
from left to right and then back again, to
cut the plots from the roll.
Form Feed
3 There’s no need to press any other keys.