HP Compaq NC6110 Hardware And Software Manual Download Page 233

Page: 233 / 246

Software Update and Recovery

Hardware and Software Guide

11–15

8. Press

esc

to continue installing a new copy of the operating

system instead of repairing it.

9. Press

enter

to set up the operating system.

10. Press

to continue setup using this partition.

11. Select

Format the partition using the NTFS file system

(Quick)

, and then press

enter

Formatting this drive deletes all current files.

12. Press

to format the drive.

The reinstallation process begins. This process takes
1 to 2 hours to complete.

The computer restarts in Windows when the process is
complete.

Reinstalling Device Drivers and Other
Software

After the operating system installation process is complete, you
must reinstall drivers.

To reinstall drivers, use the

Recovery

disc included with the

computer:

1. While running Windows, insert the

Recovery

disc into the

optical drive.

2. If you do not have autorun enabled:

a. Select

Start > Run

b. Then type

D:\SWSETUP\APPINSTL\SETUP.EXE

where

indicates the optical drive.

3. Follow the on-screen instructions for installing the drivers.

After the drivers are reinstalled, you must reinstall any software
you added to the computer. Follow the installation instructions
provided with the software.

Summary of Contents for Compaq NC6110























































































































































































































































Search results

Summary of Contents for Compaq NC6110

Reviews:

Related manuals for Compaq NC6110

Brands by name

Popular brands

HP Compaq NC6110, Hardware And Software Manual

Search results

Summary of Contents for Compaq NC6110

Reviews:

Related manuals for Compaq NC6110

Brands by name

Popular brands