HP Compaq NC6110 Hardware And Software Manual Download Page 221

Page: 221 / 246

Software Update and Recovery

Hardware and Software Guide

11–3

Obtaining the Support Software CD

The

Support Software

CD provides HP software updates and

installation instructions. The CD includes device drivers, BIOS
updates, and utilities.

To purchase the current

Support Software

CD or a subscription

that provides both the current version and future versions of
the CD, visit the HP Web site at

http://www.hp.com

Software Updates and the HP Web Site

Most software on the HP Web site is packaged in compressed
files called

SoftPaqs.

Some BIOS updates may be packaged in

compressed files called

ROMPaqs.

Most download packages contain a file named Readme.txt. A
Readme.txt file contains information regarding installing and
troubleshooting the file. The Readme.txt files included with
ROMPaqs are provided in English only.

Summary of Contents for Compaq NC6110























































































































































































































































Search results

Summary of Contents for Compaq NC6110

Reviews:

Related manuals for Compaq NC6110

Brands by name

Popular brands

HP Compaq NC6110, Hardware And Software Manual

Search results

Summary of Contents for Compaq NC6110

Reviews:

Related manuals for Compaq NC6110

Brands by name

Popular brands