3.
Connect the power cable
(1)
and data cable
(2)
to the back of the hard drive.
Figure 7-31
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
4.
Place the hard drive cage into the chassis
(1)
, then slide it down toward the bottom of the chassis
until it locks into place
(2)
.
Figure 7-32
Installing the Hard Drive Cage
Drives
75
Summary of Contents for Compaq dx7500
Page 1: ...Service Reference Guide HP Compaq dx7500 Business PC ...
Page 4: ...iv About This Book ...
Page 10: ...Index 186 x ...
