manualshive.com logo in svg

HP 64782, User Manual, Page: 78 / 554

Share
Download
HP 64782 User Manual Download Page 78

Using the Command Line with the Mouse

When using the Graphical User Interface, the 

command line

 portion of the

interface gives you the option of entering commands in the same manner as
they are entered in the Softkey Interface.  Additionally, the graphical
interface makes the softkey labels pushbuttons so commands may be entered
using the mouse.

If you are using the Softkey Interface, using the command line with the
keyboard is the only way to enter commands.

This section describes how to:

•

Turn the command line off/on.

•

Enter commands.

•

Edit commands.

•

Recall commands.

•

Display the help window.

To turn the command line on or off

•

To turn the command line on or off using the pulldown menu, choose

Settings

→

Command Line

.

•

To turn the command line on or off using the status line popup menu:
position the mouse pointer within the status line area, press and hold
the 

select

 mouse button, and choose 

Command Line Off

 from the

menu.

•

To turn the command line off using the command line entry area
popup menu: position the mouse pointer within the entry area, press
and hold the 

select

 mouse button, and choose 

Command Line Off

from the menu.

77

Summary of Contents for 64782











































































































































































































































































































































































































































































































































































Reviews:

No comments