HP 64782, User Manual, Page: 395 / 554

A range of memory can be modified such that the content of each location in
the range is changed to the single specified value, or to a single or repeated
sequence. This type of memory modification is done by entering the limits of
the memory range to be modified (--EXPR-- thru --EXPR--) and the value or
list of values (--EXPR--, ... , --EXPR--) to which the contents of all locations
in the range are to be changed.
Note that if the specified address range is not large enough to contain the
new data, only the specified addresses are modified.
If the address range contains an odd number of bytes and a word operation is
being executed, the last word of the address range will be modified. Thus the
memory modification will stop one byte after the end of the specified address
range.
If an error occurs in writing to memory (to guarded memory or target
memory with no monitor) the modification is aborted at the address where
the error occurred.
For integer memory modifications, the default is to the current display
memory mode, if one is in effect. Otherwise the default is to "byte."
For real memory modifications, the default is to the current display memory
mode, if one is in effect. Otherwise the default is "word."
The parameters are as follows:
bytes
Modify memory in byte values.
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying a memory address. See the EXPR syntax diagram.
FCODE The function code used to define the address space being referenced. See the
syntax diagram for FCODE to see a list of the function codes available and for
an explanation of those codes.
long
Modify memory values as 32-bit long word values or 64-bit real values when
preceded by real.
real
Modify memory as real number values.
<REAL#> This prompts you to enter a real number as the value.
short Modify memory values as 32-bit real numbers.
words
Modify memory values as 16-bit values.
string Modify memory values to the ASCII character string given by <STRING>.
<STRING> Quoted ASCII string including special characters as follows:
null \0
newline \n
horizontal tab \t
Emulator/Analyzer Interface Commands
modify memory
394