HP 64782, User Manual, Page: 58 / 554

To start the interface using the default configuration
•
Use the emul700 -d <emul_name> command.
In the emul700 -d <emul_name> command, the -d option says to use the
default configuration. The -d option is ignored if the interface is already
running in another window or on another terminal.
To run a command file on interface startup
•
Use the emul700 -c <cmd_file> <emul_name> command.
You can cause command files to be run upon starting the interface by using
the -c <cmd_file> option to the
emul700 command.
Refer to the "Using Command Files" section in the "Entering Commands"
chapter for information on creating command files.
Examples To start the emulator/analyzer interface and run the "startup" command file:
$ emul700 -c startup em6833x
To display the status of emulators
•
Use the
emul700 -l
or
emul700 -lv
command.
The -l option of the emul700 command lists the status of all emulators
defined in the 64700tab and 64700tab.net files. If a logical emulator name is
included in the command, just the status of that emulator is listed.
You can also use the -v option with the -l option for a verbose listing of the
status information.
Starting and Exiting HP 64700 Interfaces
To start the interface using the default configuration
57