HP 64782, User Manual, Page: 478 / 554

Run failed during CMB execute (694)
Cause: System failure or target condition.
Action: Run performance verification (Terminal Interface pv command), and
check target system.
Sample period out of bounds: <bounds> (2022)
Cause: The external timing sample period must be between 10 ns and 50 ms
(in a 1/2/5 sequence).
Action: Re-enter the command with the sample period between the bounds
shown.
Session aborted
Cause: This will only happen when running multiple emulation windows and
a fatal system error occurs.
Action: Find the window that caused the error and see the error message that
it displayed. All the additional windows will simply state "session aborted".
Cycle power on the emulator and enter emul700 -u <logical name> to make
sure the emulator is unlocked.
Session cannot be continued, ending released
Cause: The emulation session is ending automatically because it could not be
continued from the previous session. When the session has ended the
emulator will be released, meaning that others can access and use it.
Action: When you restart the emulation session later, the new session will use
all default settings.
Severe error detected, file transfer failed (411)
Cause: An unrecoverable error occurred during a transfer operation.
Action: Retry the transfer. If it fails again, make sure that the data
communications parameters are set correctly on the host and on the
HP 64700. Also make sure that you are using the correct command options,
both on the HP 64700 and on the host.
Slave clock requires at least one edge
Cause: The analyzer has an invalid clock specification.
Action: Modify your configuration and try your command again.
Error Messages
477