HP 64782, User Manual, Page: 127 / 554

To display information about bus interface ports from the emsim (emulator)
register set, choose Display
→
Configuration Info
→
Bus Interface Ports
(Emulator SIM) from either the configuration interface the
emulator/analyzer interface pulldown menu.
The following table reflects the current values in the emsim register set
that relate to the external bus interface. These values will be loaded
into the processor when the monitor is entered from emulation reset.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
----- ----- ----- ----- ----- ----- ----- -----
Port C assign CS10 CS9 CS8 CS7 CS6 CS5 CS4 CS3
data = 00H
Port E assign SIZ1 SIZ0 AS DS RMC AVEC DSACK1 DSACK0
data = FFH
Port F assign IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 IRQ2 IRQ1 MODCK
data = FFH
To display information about the memory map
•
Choose Display
→
Configuration Info
→
Memory Map from either
the configuration interface the emulator/analyzer interface pulldown
menu.
•
Using the emulator/analyzer interface command line, enter the
display configuration_info memory_map command.
When in the memory map section of the emulator configuration, the ranges of
memory that have been mapped are displayed.
The memory map configuration information shows detailed information about
the memory map and how actual mapper resources are allocated due to the
current programming of the chip selects in the EMSIM and EMRAM register
sets.
When the emulator automatically expands the memory map to assign actual
mapper resources, it looks at ranges that have been mapped during emulator
configuration.
Configuring the Emulator
To display information about the memory map
126