manualshive.com logo in svg

HP 64782, User Manual, Page: 385 / 554

Share
Download
HP 64782 User Manual Download Page 385

forward

This command lets you forward commands to other HP 64700 interfaces that
use the "emul700dmn" daemon process to coordinate actions between the
interfaces.

bms

Sends messages to the Broadcast Message Server or BMS.

<COMMAND>

An ASCII string, enclosed in quotes, that is the command to be forwarded to
the named interface.

debug

Forwards command to the high-level debugger interface.

emul

Forwards command to the emulator/analyzer interface.

perf

Forwards commands to the software performance analyzer interface.

<UINAME>

Forwards commands to a user interface name other than those available on
the softkeys.

Examples

To send the "Program Run" command to the debugger:

forward debug "Program Run" 

To send the "profile" command to the software performance analyzer:

forward debug "profile" 

See Also

The 

User’s Guide

 for the interface to which you are forwarding commands.

Emulator/Analyzer Interface Commands

forward

384

Summary of Contents for 64782











































































































































































































































































































































































































































































































































































Reviews:

No comments