HP 64782, User Manual, Page: 487 / 554

Unknown expression type
Cause: While entering your command, you included an unknown expression
type.
Action: See the EXPR command syntax for more information about
expressions. Then try entering your command again with a known expression
type.
Unload trace data failed
Cause: An unexpected error occurred while waiting for a trace to be
completed.
Action: End and release the session, and then try again.
Wait time failure, could not determine system time
Cause: The system call failed.
Action: Verify that ’date’ executes correctly from the UNIX prompt.
Warning: at least one integer truncated to 32 bits
Warning: at least one integer truncated to 16 bits
Warning: at least one integer truncated to 8 bits
Cause: The number entered was too large for the currently specified display
or access size.
Action: Try entering the command again using the correct size of number.
Width not in range: 1 <= valid width <= 80
Cause: You tried to specify the width of the field outside the range from 1 to
80.
Action: Try entering the command again using a valid number for the width.
Write to ROM break: %s" (628)
Cause: When the emulator is configured to break on writes to ROM, a
memory write access to a location mapped as ROM has occurred during
execution of the user program.
Action: Investigate the cause of the write to ROM by the user program. You
can configure the emulator so that it does not break on writes to ROM.
Error Messages
486