manualshive.com logo in svg

HP 64782, User Manual, Page: 405 / 554

Share
Download
HP 64782 User Manual Download Page 405

The parameters are as follows:

keyboard

Enters an interactive mode where you can simply type Terminal Interface
commands (unquoted) on the command line.  Use display pod_command to
see the results returned from the emulator.

<POD_CMD>

Prompts you for a Terminal Interface command as a quoted string.  Enter the
command in quotes and press <RETURN>.

suspend

This command is displayed once you have entered keyboard mode.  Select it
to stop interactive access to the Terminal Interface and return to the
Graphical User Interface or Softkey Interface.

Examples

This example shows a simple interactive session with the Terminal Interface.

display pod_command 

pod_command keyboard 

cf 

tsq 

tcq 

Click 

suspend

 to return to the Graphical User Interface or Softkey Interface.

See Also

The 

display pod_command

 command.

Also see the 

6833x Emulator User’s Guide for the Terminal Interface

 and

the Terminal Interface on-line help information.

Emulator/Analyzer Interface Commands

pod_command

404

Summary of Contents for 64782











































































































































































































































































































































































































































































































































































Reviews:

No comments