HP 64782, User Manual, Page: 473 / 554

Number of chip select function codes limited to 4 (166)
Cause: This status message occurs when you specify more than 4 chip select
function codes when mapping an address range. Only the first 4 chip selects
will be allowed.
Number of lines not in range: 1 <= valid lines <= 50
Cause: You tried to enter a number of lines that was outside the range from 1
to 50.
Action: Try entering the command again using a valid number of lines.
Number of spaces not in range: 2 <= valid spaces <= 15
Cause: You tried to enter a number of spaces outside the range from 2 to 15.
Action: Try entering the command again using a valid number of spaces.
opcode extends beyond specified address range
Cause: Memory disassembly is attempted on an address range that is too
small.
Action: Display memory mnemonic using a large address range, or no address
range at all.
perf.out file could not be opened - created
Cause: The performance analyzer failed to open or create a file named
"perf.out" in response to your "performance_measurement_end" command.
Action: Free up some file space or correct the write permissions in your
current working directory.
Perfinit - Absolute file (database) must be loaded line <LINE NUMBER>
Cause: No symbolic data base has been opened (or exists) for the target file
when you executed the "performance_measurement_initialize" command.
Action: Make sure a data base has been loaded for the target file.
Perfinit - error in input file line <LINE NUMBER> invalid symbol
You included a "label" file name with your
"performance_measurement_initialize" command, and that file contains an
invalid symbol.
Action: Edit the file and correct the invalid symbol.
Error Messages
472