manualshive.com logo in svg

HP 64782, User Manual, Page: 380 / 554

Share
Download
HP 64782 User Manual Download Page 380

end

This command terminates the current emulation session.

You can end the emulation session and keep the emulator in a locked state.
The current emulation configuration is stored, so that you can continue the
emulation session on reentry to the emulator. You also can release the
emulation system when ending the session so that others may use the
emulator.

Note that pressing <CTRL>d performs the same operation as pressing 

end

<RETURN>.  Pressing <CTRL>\ or <CTRL>| performs the same as 

end

release_system

 <RETURN>.

When the emulation session ends, control returns to the UNIX shell without
releasing the emulator.

The parameters are as follows:

locked

This option allows you to stop all active instances of an emulator/analyzer
interface session in one or more windows and/or terminals.  This option is not
available when operating the emulator in the measurement system.

release_system

This option stops all instances of the emulator/analyzer interface in one or
more windows or terminals.  The emulation system is released for other
users.  If you do not release the emulation system when ending, others
cannot access it.

Examples

end 

end release_system 

See Also

The "Exiting the Emulator/Analyzer Interface" section in the "Starting and
Exiting HP 64700 Interfaces" chapter.

Emulator/Analyzer Interface Commands

end

379

Summary of Contents for 64782











































































































































































































































































































































































































































































































































































Reviews:

No comments