HP 64782, User Manual, Page: 465 / 554

Insufficient emulation memory, memory map may be incomplete
Cause: You can map only the amount of emulation memory available in your
emulator. Trying to map additional unavailable memory may cause
information to be missing from your memory map.
Action: Modify your configuration and update the memory map to correctly
reflect the amount of emulation memory available.
Insufficient emulation memory (21)
Cause: You have attempted to map more emulation memory than is available,
or you have attempted to include tag memory with a target system memory
range when there is not enough emulation memory available.
Action: Reduce the amount of emulation memory or tag memory that you are
trying to map.
Invalid address: %s (146)
Cause: You specified an invalid address value as an argument to one of the
HP 64782 specific commands. For example, you may have specified digits
that don’t correspond to the base specified, or you forgot to precede a
hexadecimal letter digit with a number (even zero (0)).
Action: Re-enter the command and the address specification. See the
<ADDRESS> and <EXPRESSION> syntax pages in the "Commands" chapter
for information on address specifications.
Invalid address range: %s (147)
Cause: You specified an invalid address range as an argument to one of the
HP 64782 specific commands. For example, you may have specified digits
that don’t correspond to the base specified, or you forgot to precede a
hexadecimal letter digit with a number, or the upper boundary of the range
you specified is less than the lower boundary.
Action: Re-enter the command and the address specification. See the
<ADDRESS> and <EXPRESSION> syntax pages in the "Commands" chapter
for information on address specifications. Also, make sure that the upper
boundary specification is greater than the lower boundary specification (the
lower boundary must always precede the upper boundary on the command
line).
Error Messages
464