HP 54750A, User Manual, Page: 344 / 478

The General Function Menus
Display Menu
NNNNNNNNNNNNNN
fast F ast plots the data points on the display as fast as possible , which gives this
mode the fastest throughput. If acquisition speed is what you need, use the
fast mode .
When the waveform record length is less than 1000 points , the throughput
of the instrument is fast enough that you can use the other display modes
without noticing much decrease in throughput.
K ey Path 4 Displa y 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
draw waveform
NNNNNNNNNNNNNN
fast
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
connected dots The Connected Dots function draws a straight line through the data points on
the display . On waveforms where there are only a few dots representing the
acquired data points , such as when the record length is small, you may nd it
easier to have a sense of what the waveform looks like . Figure 11-2 shows a
waveform with only dots , and Figure 11-3 shows a waveform using connected
dots .
Connected dots works on channels , functions , masks and waveform memories .
K ey Path 4
Displa y
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
draw waveform
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
connected dots
Figure 11-2. Dots only .
11-28