HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, User Manual

Page: 210 / 462

29 // Wait for user to initiate rollback.
30 Pause ()
31 //
32 // Rollback.
33 E5: UnmountHostVolume ($MP1) onerror pauseat E5:
34 E4: DeleteHostVolume ($HV1) onerror pauseat E4:
35 //
36 E3: UnpresentStorageVolumes ($Rep1, $mount_host) onerror pauseat E3:
37 //
38 E2: ResyncMirrorclones ($Rep1) onerror pauseat E2:
39 //
40 // Uncomment the following line if you want the job to wait for the mirrors to resynchronize before
completing
41 //WaitHostVolumeNormalization($source_hostvol_unc1)
42 //
43 //
44 Exit (SUCCESS)
45 //
46 // Failure exit - no rollback needed.
47 E1: Exit (FAILURE)
Instant restore storage volumes to other storage volumes (template)
Template summary
A. Disables ( fl ushes) the write cache of the storage volume (virtual disk) to restore from.
B. Converts the storage volume to restore to into a container.
C. Copies (restores) from the storage volume (by snapclone) to the container.
D. Re-enables the write cache of the source storage volume.
NOTE:
This template cannot be used with some older versions of controller software.
Template options
• Number of volumes . Adds commands for each storage volume to restore from.
• Suspend source before replication . Adds launch commands for interacting with an enabled host,
for example to suspend and resume host application I/O.
• Include e-mail noti fi cation . Adds a command for e-mail noti fi cation of the job instance status.
See SetNoti fi cationPolicy .
Comments
• This template cannot be used with some older versions of controller software.
• HP recommends that you perform restores of host volumes using the GUI.
210
Jobs