HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, User Manual

Page: 81 / 462

Applicable managed set fi lter
View
DR
groups
Enabled
hosts
Host
volumes
Storage
systems
Virtual
disks
DR groups view
storage systems > DR groups > virtual disk
yes - - yes yes
Host volumes view
enabled hosts > host volumes > virtual disks
- yes yes - -
Virtual disks view
storage systems > virtual disks
yes - - yes yes
More help
• General information . See about managed sets .
• Procedures . See creating managed sets and adding resources to a managed set .
Tips (topology views)
General
IMPORTANT:
Do not use browser buttons to refresh the topology view or to navigate. Using browser buttons will end
the session. See troubleshooting browser window is blank . The view is automatically refreshed from the
replication manager
database
every 15 seconds. See also automatic refresh of resources .
Pinned view
• When a view is pinned (locked) you cannot move (drag-and-drop) resources in the layout. To
move resources, unpin the view, move the resources, then re-pin the view.
• Each view can be independently pinned or unpinned.
Layout
• An unpinned view is redrawn in its default layout and is sized to fi t the current image area.
IMPORTANT:
The locations of all moved resources in the view are discarded. If you have moved many resources, HP
recommends that you pin the view.
• A pinned view is not redrawn unless it has been previously zoomed. When redrawn, the layout is
the original size but retains the locations of moved resources.
• In some cases, resources can extend beyond the scrollable image area. This is indicated by
resource connection lines that extend off the tab.
To access these resources, you can zoom out until the resources appear in the view.
HP StorageWorks Replication Solutions Manager 4.0.1
81