HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, User Manual

Page: 380 / 462

1. In the navigation pane, select Managed Sets .
2. On the List tab, select Actions > New . The New Managed Set window opens.
3. Select the type of managed set you want to create in the drop-down list.
4. Enter a name for the managed set.
5. Click OK . An empty managed set is created. To add members, see
adding resources to managed sets .
Deleting managed sets
Delete a managed set of resources.
Considerations
• You can use the GUI or CLUI. See managed sets actions cross reference .
• When you delete a managed set, its members (resources) are removed from the managed set
but they are not deleted as individually available resources.
Procedure
This procedure uses the GUI.
1. In the navigation pane, select Managed Sets .
2. On the List tab, select the managed set you want to delete.
3. Select Actions > Delete .
4. Click OK .
Renaming managed sets
Rename a managed set.
Considerations
• You can only use the GUI.
• If you rename a managed set that is referenced in a job, you must also edit the job to re fl ect the
name change, or the job will fail when run.
Procedure
1. In the navigation pane, select Managed Sets .
2. On the List tab, select the managed set to rename.
3. Select Actions > View/Edit Properties . The Managed Set Properties window opens.
4. In the name value fi eld, enter a new name.
5. Click OK . The managed set is renamed.
Removing resources from managed sets
Remove a resource from a managed set.
Considerations
• You can use the GUI or CLUI. See managed sets actions cross reference .
• You can also remove resources from resource’s action menu. See removing DR groups ,
removing enabled hosts , removing host volumes , removing storage systems , and
removing virtual disks .
380
Managed sets