HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, User Manual

Page: 422 / 462

Considerations
• You can use the GUI, or jobs to fracture a mirrorclone. See virtual disks actions cross reference .
• Guidelines apply. See virtual disks mirrorclone guidelines .
• When using jobs, you must explicitly fl ush the source virtual disk write cache before the fracture is
started. See fractured mirrorclone write cache fl ush .
Procedure
The following procedure uses the GUI.
1. In the navigation pane, select Virtual Disks .
2. On the List tab, select the mirrorclone virtual disk to fracture. Alternately, you can select the
mirrorclone’s source virtual disk.
3. Select Actions > Fracture Mirrorclone . The Fracture Mirrorclone con fi rmation window opens.
4. Click OK . The window closes.
5. The Monitor Job window opens. An implicit job is begun to execute the action. See jobs
implicit job startup .
6. After the implicit job completes, refresh the content pane to display the most current resources.
See refreshing display panes .
Launching the device manager
Access HP Command View EVA from the replication manager. Each time you use this action in the same
replication manager session, a new window for HP Command View EVA is opened.
Considerations
• You can only use the GUI to launch the device manager. The action is not available unless an
individual resource is selected (highlighted) in the replication manager content pane.
• You must know the security credentials (user name and password) to log on to HP Command
View EVA.
Procedure
1. In the navigation pane, select DR Groups , Storage Systems or Virtual Disks .
2. On a List or Tree tab select any storage resource.
3. Select Actions > Launch the Device Manager . A new browser window opens.
4. Respond to the security alert message and then log on to HP Command View EVA.
Listing individual resource events
Display the events for an individual resource.
Considerations
• You can only use the GUI.
• Applies to only to individual DR groups, storage systems, and virtual disks.
Procedure
1. In the navigation pane, select resource type.
2. On the List tab, select the speci fi c resource whose events are to be displayed.
3. Select Actions > List events . An events window for the resource opens.
422
Virtual disks