HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, User Manual

Page: 146 / 462

Mounting all logical volumes in a replicated volume group
The local replication wizard mounts all of the logical volumes in a replicated volume group, as
appropriate:
• If a logical volume is mounted when the volume group is replicated, then the logical volume
replica will be mounted.
• If a logical volume is not mounted when the volume group is replicated, , then the logical volume
replica will not be mounted.
• When replicated, the original volume group must have at least one mounted logical volume . If the
volume group has no mounted logical volumes, or has only raw logical volumes, this operation
may fail when the wizard’s job is run.
Mount point pre fi xes – general
• When mounting to the same host as the original, you must include a mount point pre fi x.
• When mounting to a different host than the original, a pre fi x is optional.
• If you use the wizard to create multiple replicas of a volume group and you plan to mount the
replicas to the same host at the same time, you must use a unique mount point pre fi x for each
volume group replica.
Mount point pre fi xes – OS speci fi cs
Mount points that you specify must be comply with OS formats. For example, with most UNIX OSs,
specifying /backup would add /backup to mount points for all logical volumes in the volume group.
Linux . You cannot mount a volume group replica on the same host as the source volume group.
OpenVMS . OpenVMS does not support volume groups. This operation is not applicable to OpenVMS
volume sets.
Solaris . You cannot mount a volume group replica on the same host as the source volume group.
Tru64 UNIX .
Windows . Windows does not support volume groups.
Mount points (drive letters) and device names
The mount point property indicates whether a host volume is mounted in the host’s fi le system or not.
Values are:
• Mount point identi fi er . Identi fi es the location in the host’s fi le system where a host volume is
attached. Mount points are displayed in OS-speci fi c format.
• Not mounted . Indicates that the host volume is not mounted in the host’s fi le system.
See also host volumes raw disks .
Linux and UNIX mount points and device names
Examples
Host OS Device name Mount point
AIX /dev/dsk/hd1 /home/cats
HP-UX
/dev/dsk/c2t0d2 /users/cats
Linux /dev/sda3 /var/cats
Solaris /dev/dsk/c0t5d0s6 /usr/cats
Tru64 UNIX
/dev/disk/dsk100c /users/cats
146
Host volumes