5 Functions
57
5.7
Maintenance - Check
Items to be checked are as follows.
5.7.1
Unit Information
1.
Press the [CHECK UNIT INFORMATION] on the CHECK screen.
The CHECK UNIT INFORMATION screen appears.
Information about the model number and individual ID are displayed.
5.7.2
Individual ID Setting
1.
Press the [SET ID] on the CHECK UNIT INFORMATION screen.
The INDIVIDUAL ID SETTING screen appears.
2.
Enter the ID number with the numeric keypad, and press [SET].
Input range: 00000000 to 99999999
Tip
[CLEAR]
：
Clears all input numeric values.
[BACK]
：
Clears the rightmost number.
The screen returns back to CHECK UNIT INFORMATION screen.
Unit information and ID
setting check
Checks the unit model and ID etc., and sets the ID.
The ID number is used as the folder name of the data during
serial communication and transfer to the CF card.
External input and output
check
Checks the operation of the contact input and output.
Analog input value check
Checks the analog signal value for measurement transferred
from the analyzer unit. Can be used to simply check whether
it is activated or not (for service representatives).
Analog output transmission
check
Checks the analog output value.
[MAINT.]
MEAS. screen
[CHECK]
Refer to "5.3 Maintenance Screen Display" (page 36).
MAINTENANCE screen
CHECK screen
[CHECK UNIT
INFORMATION]
[SET ID]
