5 Functions
48
5.5.2
Setting of Decimal Place for each Component
The decimal place for each measuring component is set here.
1.
Press the button for DECIMAL PLACE on the MEAS. SETTING for each measuring
component screen.
The DECIMAL PLACE screen appears.
The screen shows an example for UV.
2.
Enter a numeric value for the decimal place and press [SET].
The screen returns back to the MEAS. SETTING for each measuring component screen.
The decimal place setting for each measuring component is complete.
Perform the same procedure to set the measuring range for the other components.
Note
The decimal place for UV-
VIS is the same as that for UV.
[MAINT.]
MEAS.
[UV][VIS][COD][TURB]
[MEAS.SETTING]
Refer to "
Setting Screen Display for each Measuring Component" (page 46).
MAINTENANCE
MEAS. SETTING
screen
screen
screen
MEAS. SETTING for each
measuring component screen
DECIMAL
PLACE
