Honeywell XI581AH User Manual Download Page 96

Page: 96 / 108

ALPHABETIC REFERENCE

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

Time Programme: Time Program 1

Today

Daily Programme
Weekly Programme
Annual Programme
Special Days

Select Special Days Option

Use the arrow keys to move to and highlight

Special

days

and press Enter (

↵

)

to complete the selection.

RESULT: The display window lists options for special days.

Special Days: Time Program 1

Status

: On

Modify

Delete

Continue with desired special days procedure:

Modify

Change the daily program assignment for special days in the
system. See section "Modify Special Days" (page 92) for
details.

Delete

Delete a special day. See section "Delete Special Days" (page
93) for details.

Status

Enable/disable the special days feature. See section "Change
Status (Enable/Disable) Special Days Function" (page 94) for
details.

Modify Special Days

Continued from the previous procedure.

Special Days: Time Program 1

Status

: On

Modify

Delete

Select Modify Option

Use the arrow keys to move to and highlight

Modify

and press Enter (

↵

) to

complete the selection.

RESULT: The display window chronologically lists all special days and the

assigned daily programs (if assigned). If a special day does not have
a daily program assignment, that day uses the daily program
specified in the weekly program.

Special Days: Time Program 1

New Year’s Day

Vacation

▲

Epiphany

Workday

■

Shrove Tuesday

Ash Wednesday

Workday

■

Good Friday

Halfday

▼

NOTE:

All special days may not be able to appear in the display window at

the same time. To view special days that do not display, press the

right arrow key to display the next page.

Summary of Contents for XI581AH













































































































Search results

Summary of Contents for XI581AH

Reviews:

Honeywell XI581AH, User Manual, Page: 96 / 108

Search results

Summary of Contents for XI581AH

Reviews: