manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 46 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 46

EVERYDAY OPERATIONS

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

42

Default Data Points

AI0101

0.0

▲

▲

▲

▲

AI0102

0.0

■

AI0103

0.0 1

AI0104

0.0

■

AI0105

0.0

▼

The default user addresses are coded to correspond with the physical I/O in the

following way:

AI0101

— Analog input, board 1, input 1

AO0201

— Analog output, board 2, output 1

DI0301

— Digital input, board 3, input 1

DO0401

— Digital output, board 4, output 1

3P0101

— Motor output, board 1, output 1

Values are displayed (0/1 for digital points) for each of the default data points, and

the values are refreshed in this screen as they change. Data points related to
Distributed I/O modules will appear in the same way, with module number

appearing instead of board number.

Manually Set Outputs

6.

Use the arrow keys to move to and highlight desired output and then press

Enter (

↵

) to complete the selection.

RESULT: The selected output data point is shown with its value/state:

AO0101

STATE/VALUE :

0.0 %

BACK

7.

Select 'State/Value' and press Enter (

↵

) to modify it. Or, select 

BACK

 to return

to the 'Data Points' list.

View Alarms

8.

To view the list of alarms, select 

Alarm History

 from the 'Display

Datapoints/Alarm History' screen (Step 

4

, above).

RESULT: The alarm buffer is shown, listing all system alarms and all changes

of state of inputs: Alarms are generated for changes of state/value on
inputs, which allows shorting and opening the inputs at the switches
and/or sensors and then checking the alarm buffer to verify the
wiring.

17.09.98 16:35 AI0101

▲

▲

▲

▲

17.09.98 16:34 AI0101

■

17.09.98 16:32 AI0102

1

17.09.98 16:30 AI0102

■

17.09.98 16:28 AI0103

■

17.09.98 16:30 AI0104

▼

9.

To view an alarm, move the cursor to select the default user address from the

list box using the arrow keys. Confirm with Enter. The following screen will

appear showing date, time, user address, data point value, and alarm text.:

Summary of Contents for XI581AH













































































































Reviews:

No comments