manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 85 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 85

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

81

EN2B-0126 (74-3554-8)

Time Programme:

Time Program 1

Modify

Delete

New

Copy

RESULT:

The top line of the display window shows the selected time
program. The remaining lines list daily program functions
(Modify, New, Delete, and Copy).

Delete Daily Program Function

2.

Use the arrow keys to move to and highlight 

Delete

 and then press Enter (

↵

) to

complete the selection.

RESULT: The window lists the daily programs you can delete.

Time Programme: Time Program 1

Everyday

▲

▲

▲

▲

Weekend

■

Holiday

1

Workday

■

Annual leave

▼

NOTE:

All daily programs may not be able to appear in the display window at

the same time.

Select a Daily Program to Delete

3.

Use the arrow keys to move to and highlight the daily program you want to

delete (for example, Holiday). Then press Enter (

↵

) to complete the selection.

RESULT: The window asks you to confirm that you really want to delete the

daily program.

Time Progr. : Time Program 1
Daily Progr.: Holiday

Really delete?

Yes

No

Delete Daily Program

 

4.

If you do

 not 

want to delete the daily program, press Enter (

↵

).

If you do want to delete the daily program, use the arrow keys to move to and

highlight 

Yes

 and press Enter (

↵

) to complete the selection.

RESULT: If the daily program could not be deleted because it is still part of a

weekly or annual program, the message DELETE IMPOSSIBLE
flashes at the bottom of the display window.
If the program was deleted (or you canceled the deletion), the 'Time
Programme' screen lists available time programs.

5.

Press Cancel (C) to return to the list of time programs.

Switch Points

Purpose

To add, modify, or delete a daily program switch point.

Access Level

You must have Access Level 2 or 3 to perform this task.

Procedure

1.

Display the 'Daily Program' screen that lists daily program functions ('Modify',

'New', 'Delete', and 'Copy'), if the menu is not already on display.

Summary of steps:
a. At the Main Menu, use the arrow keys to move to and highlight 

Time

Programme

. Press Enter (

↵

) to complete the selection.

Summary of Contents for XI581AH













































































































Reviews:

No comments