manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 100 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 100

ALPHABETIC REFERENCE

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

96

Reset the Totalizer

Define Service Interval

Use the up/down arrow keys to move
to and highlight 

Yes

. Press Enter (

↵

)

to select 'Yes' and to reset the
totalizer.

RESULT: The controller resets the

totalizer and the display
window returns to the list
of totalizer points. Notice
that the accumulated
number for the reset point
is zero.

NOTE:

To avoid resetting the
totalizer, use the arrow keys
to move to and highlight 

NO

and press Enter (

↵

).

Use the arrow keys to move to and
highlight the 

Service interval

 field.

Press Enter (

↵

).

RESULT: The entry in the Service

interval field starts
blinking and the high-
lighting disappears.

Press the plus or minus key to incre-
ment or decrement the Service Inter-
val digit from 0 to 9. Use the right or
left arrow key to move to the tens,
hundreds, thousands, etc., digit.
Press Enter (

↵

).

RESULT: The entry in 

the Service

interval

 field stops

blinking but is highlighted.

5.

Press Cancel (C) or 'Back' to return to the totalizer data point list. When you are

finished, repeatedly press Cancel (C) to return to the Main Menu.

Viewing Bus Devices

Purpose

To display a list of devices currently active on the system bus. The list can include
devices that do not have buswide access capability so a remote log-in may not be

possible to all the listed devices.

Access Level

All users can perform this task. The display is available only while in local controller
mode.

Procedure

1.

From the Main Menu, use the arrow keys to move to and highlight 

System data

.

Press Enter (

↵

) to complete the selection.

RESULT: The display window show some controller data and the 

Buswide

Access

 option.

System Data

System Info
HW-Interface Config.
Flash EPROM

Buswide Access

2.

Use the arrow keys to move to and highlight 

Buswide Access

 and press Enter

(

↵

) to complete the selection.

RESULT: The display window lists the buswide access options you can choose.

Buswide Access
CONTROLLER_01

Remote Login

Alarm Standby On
Alarm Standby Flag

Show All DevicesAlarm Standby Off

Summary of Contents for XI581AH













































































































Reviews:

No comments