manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 91 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 91

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

87

EN2B-0126 (74-3554-8)

Weekly Progr.: Time Program 1

Week Day

: MONDAY

Daily Progr.: Weekday

Back

Switch Points

Assign

6.

To assign the selected program, press Enter (

↵

). The software assigns the daily

program and redisplays the 'Weekly Progr.' screen with the new assignment.

To redisplay the 'Time Programme' screen with the 'Today', 'Daily Programme',

etc., menu items, use the arrow keys to move to and highlight 

Back

 and press

Enter (

↵

). The software does not change the assignment for the day.

To display the 'Switch Points' screen for assignment of new switch times (that is,
modify the daily program), use the arrow keys to move to and highlight 

Switch

Points

 and press Enter (

↵

) to complete the selection. To modify the switching

point, refer to the "Modify Switch Point" section for details.

7.

Select another day to modify or press Cancel (C) to return to the 'Time
Programme' screen.

Annual Programs

Purpose

To modify an annual program in order to assign a different daily program to a

specific day of the week.

Access Level

You must have Access Level 2 or 3 to perform this task.

Select Time Program

Function from Main Menu

1.

At the Main Menu, use the arrow keys to move to and highlight 

Time

Programmes

. Press Enter (

↵

) to complete the selection.

RESULT: The display window shows the available time programs.

Time Programme

Time Program 1

▲

▲

▲

▲

Ventil. Sys

■

Lighting

1

Heating zone east

■

Heating zone west

▼

NOTE:

All time programs may not be able to appear in the display window at
the same time.

Select a Time Program

2.

Use the arrow keys to move to and highlight the time program having the

desired annual program. Then press Enter (

↵

) to complete the selection.

RESULT: The top line of the display window shows the selected time program.

The remaining lines display the types of time programs you can
select.

Time Programme

Time Program 1

Today

Daily Programme
Weekly Programme
Annual Programme
Special Days

Select Annual Program

 

Option

3.

Use the arrow keys to move to and highlight 

Annual

 

Programme

 and press

Enter (

↵

) to complete the selection.

Summary of Contents for XI581AH













































































































Reviews:

No comments