Honeywell XI581AH User Manual Download Page 26

Page: 26 / 108

EVERYDAY OPERATIONS

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

Alarm Buffer Option

Alarm Type Options

Alarm Buffer

is highlighted by default when the 'Alarms'

screen displays.

Press Enter (

↵

) to select

Alarm

buffer

RESULT:

The display window lists all alarms in controller
memory.

Press the arrow keys to move to and highlight the desired
option (

All Points in Alarm

Critical Points in Alarm

Non

Critical Points in Alarm

Buswide Alarms

). Then press

Enter (

↵

) to complete the selection.

RESULT:

The display window lists points (all, critical, or

non critical) currently in alarm.

Alarm Buffer
19.07.93 16:35 Exhaust_fan

▲

19.07.93 06:26 Cafe

room

temp

■

18.07.93 23:57 Window_contact_17

18.07.93 16:07 Conf_room_temp

■

17.07.93 20:17 Htg._zone_pump_1

▼

All Points in Alarm:
Exhaust_fan

▲

Cafe_room_temp

■

Window_contact_17

Conf

room

temp

■

Htg._zone_pump_1

▼

First column—The date the controller generated the alarm.

The date appears in Date.Month.Year (DD.MM.YY)
notation where DD=1-31, MM=1-12, and YY=the last
two digits of the year.

Second column—The time the controller generated the

alarm. The time appears in 24-hour (HH.MM) notation
where HH=00-23 and MM=00-59.

Third column—The user address of the point in alarm.

NOTE:

Alarm memory can contain 99 entries. All alarms

may not be able to appear in the display window at
the same time. To view alarms that do not display,

press the right arrow key to display the next page.

For other scroll bar functions, see the scroll bar
description in the "GETTING STARTED" section.

Select an Alarm

Use the arrow keys to move to and highlight the specific alarm you want to view.

Then press Enter (

↵

) to complete the selection.

RESULT: The display window shows detailed information about the selected

alarm.

Alarm Buffer
19.07.93

12:03:31

Cafe_room_temp
Alarm

Back

CPU not available

with
C-Button

Second line

Date and time the controller generated the alarm.

Third line

User address of the alarm point.

Fourth line

State or value of the point at the time the alarm was
generated. If you selected an analog point, this line displays a
value such as a temperature. If you selected a digital point,
this line displays a status such as OFF or ON.

Fifth line

Alarm text.

Press Cancel (C) to return to the list of alarms.

Viewing Buswide Alarms

Purpose

To view new critical and noncritical alarms that occurred on controllers other than

the local controller. You can also view the alarm buffer of a remote controller.

Access Level

All users can perform this task.

Requirement

To enable viewing of buswide alarms, see section "Enabling/Disabling Buswide

Alarm Mode and Alarm Flag" (page 23).

Summary of Contents for XI581AH













































































































Search results

Summary of Contents for XI581AH

Reviews:

Honeywell XI581AH, User Manual, Page: 26 / 108

Search results

Summary of Contents for XI581AH

Reviews: