Honeywell XI581AH User Manual Download Page 87 | Manualshive

Page: 87 / 108

Honeywell XI581AH User Manual Download Page 87

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

83

EN2B-0126 (74-3554-8)

Continue with the appropriate switch point procedure:

Next

Display next switch point assigned to the daily program.

Previous

Display the previous switch point.

New

See section "New Switch Point" (page 83) to create a new
switch point.

Delete

See section "Delete Switch Point" (page 85) for details.

Back

Return to the 'Time Programme' screen.

Arrow keys

Use the up/down arrows, plus, and minus keys to modify the
address, time, or value/status for a switch point. See section
"Modify Switch Point" (page 84) for details.

New Switch Point

Continued from the previous section.

Time

Progr.: Time Program 1

Daily Progr.: Weekday
Address: C1_DO_1
Time

: 08:00

Value

: On

Opt.: OFF

Next

Previous

New

Delete

Back

Select New Switch Point Function

5.

To create a new switch point for the daily program, use the arrow keys to move
to and highlight

New

and then press Enter (

↵

) to complete the selection.

RESULT: The display window lists the points that are controlled by the selected

daily program.

Time Progr. : Time Program 1
Daily Progr.: Weekday

C1_DO_1

▲

▲

▲

▲

Cafeteria_temp.

1

Office_room_temp.

■

Main_lights

▼

NOTE:

All points may not be able to appear in the display window at the

same time.

Select a Point

6.

Use the arrow keys to move to and highlight the point for which you want to add
another switch point, for example, C1_DO_1. Then press Enter (

↵

) to complete

the selection.

RESULT: The display window lists fields in which you can enter information

about the new switch point. The fields contain information on the
selected point. The 'User Address' field displays the user address of
the selected point.

Time

Progr.: Time Program 1

Daily Progr.: Weekday
Address: C1_DO_1
Time

: 08:00

Value

: On

Opt.: OFF

Next

Previous

New

Delete

Back

Add the Switch point

7.

Enter new information over the existing information.

You can enter information in the following fields:

«
...
85
86
87
88
89
...
»

Summary of Contents for XI581AH













































































































Reviews:

No comments