manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 37 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 37

XI581/2 BUSWIDE OPERATOR INTERFACE

EVERYDAY OPERATIONS

33

EN2B-0126 (74-3554-8)

Tool Identification Data
Name: CARE

Version: 3.00.00

User Name:
User ID: xxxxxxxxx-xxxx-xxxx-xxxx

-xxxxxxxxxxxx

Back

Next

Tool Name

This is the name of the tool used to create the currently loaded
application

Tool Version

The version of the tool used to create the current application.

User Name

The name of the user who created the current application.

User ID

The license number of the tool used to create the current
application.

4.

To display more information for a controller, highlight 

Next 

and press Enter (

↵

).

The following screen displays the AMA and ATX file revisions.

Operating Sequence Revision

AMA Revision:

1.16.1.12

ATX Revision:

1.16.1.12

Back

This screen displays the revision numbers for the AMA and ATX files used to create
the operating sequence. Asterisks will appear before and after the AMA revision

number if the AMA or ADS files have been changed before the compilation.

Asterisks will also appear before and after the ATX revision number if the ATX file
has been changed before compilation. 

'Back'

 is preselected to move to the

previous screen. Confirm with ENTER

Summary of Contents for XI581AH













































































































Reviews:

No comments