manualshive.com logo in svg

Honeywell XI581AH, User Manual, Page: 67 / 108

Share
Download
Honeywell XI581AH User Manual Download Page 67

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

63

EN2B-0126 (74-3554-8)

Flash EPROM and RAM Management

General

Excel controllers contain their application data in RAM. However, RAM is a volatile

form of memory and the information can be lost in a power outage. To ensure the
information is not irretrievably lost, you can save the application data to EPROM

which is a nonvolatile form of memory that retains information without power.
Since the save procedure does not require to physically burn an EPROM, and thus

is relatively quick, the EPROM is called a  “Flash” EPROM and the process is called

“flashing” the EPROM.

NOTE:

While it is possible to flash additional applications to EPROM without
affecting previously stored applications, it is not possible to erase only

individual applications (for example, to make space for new

applications).

This section describes the procedures that apply to moving data between Flash

EPROM and RAM:

— Erasing the Flash EPROM
— Saving application in RAM to Flash EPROM
— Restoring application from Flash EPROM to RAM

Erasing Flash EPROM

Purpose

To clear all application data from Flash EPROM.

Access Level

You must have access level 3 to perform this task.

CAUTION

The following procedure erases ALL application data in Flash EPROM.

Select System Data from Main Menu

1.

At the Main Menu, use the arrow keys to move to and highlight 

System Data.

Press Enter (

↵

) to complete the selection.

RESULT: The 'System Data' screen displays with controller name and software

version as well as three possible functions (depending on access
level).

System Data

System Info

HW-Interface Config.
Flash EPROM
Buswide Access

Select Flash EPROM

 

Item

2.

Use the arrow keys to move to and highlight 

Flash EPROM.

 Press Enter (

↵

) to

complete the selection.

RESULT: The display window lists options for controlling Flash EPROM.

Flash EPROM

Save Application

Erase Flash EPROM
Show Applications

Erase Flash EPROM

3.

  Use the arrow keys to move to and highlight 

Erase Flash EPROM 

and then

press Enter (

↵

) to complete the selection.

Summary of Contents for XI581AH













































































































Reviews:

No comments