manualshive.com logo in svg

Honeywell MAXPRO NVR Hybrid PE, Hardware Installation And Configuration Manual

Share
Download
Honeywell MAXPRO NVR Hybrid PE Hardware Installation And Configuration Manual Download Page 76

I N S T A L L I N G   T H E   N V R   S O F T W A R E

Client Installation

76

 MAXPRO NVR 5.0 Installation and Configuration Guide

4

Caution:

For better security, close the browser upon logout.

P r e r e q u i s i t e s   t o   a c c e s s   M A X P R O   N V R   S e r v e r   t h r o u g h  

W e b   C l i e n t

The following are the prerequisites to access the MAXPRO NVR server through Web Client:

•

Silverlight

: Ensure that Silverlight version 5 and above is installed on your machine. 

If you don't have the Silverlight plug-in on your machine, you can download it from 
the following Microsoft link. 

http://www.microsoft.com/getsilverlight/Get-

Started/Install/Default.aspx

Note:

Silverlight plug-in is not supported by Chrome version 42.x or above and
Microsoft Edge browser.

•

Web Browsers Supported on Windows Systems

: Ensure that at least one of the 

following supported web browsers are installed on your PC: 

•

Internet Explorer version 8 or above

•

Firefox version 15.0.1 or above

•

Chrome version 32.x to 41.x only.

Note

MAXPRO NVR Web Client is only supported by below Web Browsers on 

Windows 10 with Silverlight plug-in installed 

•

Internet Explorer version 11 or above

•

Firefox version 40 or above

Caution:

For better security, close the browser upon logout.

•

Web Browsers Supported on MAC systems

: Not supported.

Client Installation

MAXPRO NVR 4.0 Client installation gives you an option to install MAXPRO NVR Client on the 
client workstations.

Summary of Contents for MAXPRO NVR Hybrid PE









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands