. . . . .
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
MAXPRO NVR 5.0 Installation and Configuration Guide
147
5.
In the
Output(s)
pane, select an output and then click
On
to turn on the relay manually or
Click
Off
to turn off the relay manually.
6.
Click
Save
or click
Reset
to undo the changes.
To trigger the output from viewer screen
:
1.
Click the
Viewer
tab.
2.
On the left pane, click
Outputs
tab, the list of camera outputs are displayed in
Sites
.
3.
Right-click the required camera output and then set
ON
or
OFF
.
Configuring 360/180 Cameras
Configuring the Panomorph Settings for the Cameras with
Immervision Support
ImmerVision’s Panomorph lens enables 360 degree Field of View (FOV). This lens is
compatible with industry standard analog and IP cameras.
By using the Panomorph lens with your IP/ Analog camera, you can:
•
View live, record and playback the complete 360x180 FOV.
•
Eliminate blind spots in the FOV.
•
Increase the video surveillance coverage.
•
Detect, track and analyze throughout the entire area.
•
Playback the recorded video with digital watermark for evidence purposes.
Caution:
Only Immervision certified camera models can support this feature
enabled. Before configuring this feature, please check whether your
camera has the Panomorph lens.
ON/OFF
Manual control of the output. Click
ON
to close the relay
contacts. Click
OFF
to open the relay contacts.
Field
Description
Summary of Contents for MAXPRO NVR Hybrid PE
