Honeywell MAXPRO NVR Hybrid PE, Hardware Installation And Configuration Manual

Page: 135 / 360

. . . . .
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
MAXPRO NVR 5.0 Installation and Configuration Guide 135
11. If audio is supported for the camera then Enable Audio check is displayed. Select the
check box to enable audio. 1-way audio (camera to NVR) is supported for specific IP
cameras. Please visit URL:
http://www.security.honeywell.com/hota/ for the compatibility
list and the models supported.
Note:
Profile-G compliant camera time should be in sync with NVR time.
Ensure you configure the NTP server to avoid Time Sync related issues.
12. Under Primary Stream > Schedules :
• Recording Settings :
• Continuous Recording - All cameras added are defaulted to “24/7” recording.
You can choose a different option from the drop-down list.
• Event Based Recording - This is “None” by default. Select an option from the
drop-down if you want to do motion/event based recording.
• Recording Deletion Settings:
• Select the Event Recording video deletion duration.
• Select the Continuous Recording video deletion duration.
• Archive Recording Older Than :
• Continuous - This is “None” by default. Select an option from the
drop-down if you want to archive the continuous recording.
• Event - This is “None” by default. Select an option from the
drop-down if you want to archive the event recording.
• Delete Archived Recording After:
• Continuous Recording - This is “365 Days” by default. Select the number of
days from the drop-down after which the archived continuous recording can be
deleted.
• Event Recording - This is “365 Days” by default. Select the number of days
from the drop-down after which the archived event recording can be deleted.
13. Under Primary Stream > Preferences > Stream Preferences Settings. See step 9 for
more information.
14. Click Save .
Configuring the Auto Discovery Settings
The Auto Discovery Settings enable you to select the IP address range for discovery, set the
video format (NTSC/PAL), username and password of a camera as it is being added to the
NVR from the
Discovery window. The Username and Password set for the camera in
MAXPRO NVR must match the username and password on the camera (actual device) to
stream video into MAXPRO NVR. See
Figure 6-13 .
Note:
Auto Discovery Settings are only applicable for Honeywell, AXIS and ONVIF
cameras.