Honeywell MAXPRO NVR Hybrid PE, Hardware Installation And Configuration Manual

Page: 59 / 360

. . . . .
S E T T I N G U P T H E M A X P R O N V R
MAXPRO NVR Hybrid Connections
MAXPRO NVR 5.0 Installation and Configuration Guide 59
Note:
The video inputs are 75
Ώ
BNC connectors. Plug one end into the video source
(DVD, Camera, etc.) and plug the other end into the desired BNC input on the
NVR.
Looping Output Termination
If the image appears distorted or virtually un-viewable, turn the termination resister to the ON
position, making it terminated. When it is necessary to terminate a looping output, the NVR
has built-in termination that allows users to select individual outputs. It is not always necessary
to terminate the output; it depends on the device to which you are connecting. As a rule, if the
image appears distorted or virtually un-viewable, it likely needs to be terminated.
Note:
Please refer to the specific Hybrid unit data sheet for more information on number
of looping outputs supported on a specific unit.
Figure 3-12 Looping Output Termination
Note:
Always leave the dip switch set to the ON position when the Looping Outputs are
not used and only the installer should decide to turn it ON /OFF.