. . . . .
A P P E N D I X B
VMD Settings and Motion-based Recording Configuration
MAXPRO NVR 5.0 Installation and Configuration Guide
331
Note
•
A combination of continuous and event-based recording from a camera can
be achieved using the relationship between Frames Per Second (FPS) and
Group Of Pictures (GOP).
•
FPS is a measure of the images every second from the camera, while GOP
determines how frames are sequenced.
•
Every GOP starts with an I-frame (full image) and is followed by smaller
images which are relative to the images preceding it. So, for a GOP of 5 there
will be one I-frame for every 5 frames.
The following figure shows an example of three seconds of video at 5 FPS and 5 GOP.
Figure B-1 I-frame Example
The NVR record Quality Settings for Continuous (background) and Event recording can be
used to achieve different level of FPS by selecting one of the following options.
•
Same as Live
: Every frame is recorded (5 FPS in the example)
•
Every I-frame
: Every I-frame is recorded (1 FPS in the example)
•
Every Second Iframe
: Every second I-frame is recorded (1 frame every 2 seconds in the
example)
•
Every Third Iframe
: Every third I-frame is recorded (1 frame every 3 seconds in the
example)
For more detailed information on the relationship between FPS and GOP and example
settings to achieve different frame rates, refer to the table below:
Note:
GOP value below 5 may not be achieved from all the cameras.
Summary of Contents for MAXPRO NVR Hybrid PE
