. . . . .
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
MAXPRO NVR 5.0 Installation and Configuration Guide
143
Adding FLIR Camera
The FLIR cameras are not discovered automatically in MAXRPRO NVR; hence you must add
these cameras manually. The IP address of the FLIR camera should include the port number
8081 (default ONVIF port used by camera). For example: xxx.xxx.xxx:8081.
To add FLIR Camera in MAXPRO NVR
1.
In MAXPRO NVR, click the
Configurator
tab. The
System
page displays by default.
2.
Click the
Camera
tab to open the
Camera
page.
3.
Click
Manual Add
. A new camera is added under
Camera
list.
4.
Type the required
Camera Name
.
5.
Type the
IP Address
of the camera as shown in figure. The IP address should include the
Port number 8081. For example if the IP address is 111.221.0.333 then you should add
the port number (8081) as 111.222.0.333:8081.
6.
Select the required FLIR Series model camera from the
Camera Type
drop-down list as
shown below (
) for example
FLIR F-Series
).
Figure 6-19 Adding FLIR Model Camera
7.
Scroll right to manually type the
User Name
and
Password
. The default user name is
admin
and password is
admin
.
Summary of Contents for MAXPRO NVR Hybrid PE
