manualshive.com logo in svg

Honeywell MAXPRO NVR Hybrid PE, Hardware Installation And Configuration Manual

Share
Download
Honeywell MAXPRO NVR Hybrid PE Hardware Installation And Configuration Manual Download Page 117

. . . . .

C O N F I G U R I N G   M A X P R O   N V R

Configuring the System Settings

MAXPRO NVR 5.0 Installation and Configuration Guide

117

C o n f i g u r i n g   t h e   S y s t e m   S e t t i n g s

The 

System

 settings help in configuring the following:

•

General System Settings

 - enable configuring the device name, device description, 

and device address for MAXPRO NVR.

•

Event Recording Settings

 - enable configuring the times associated to event and 

user based recording. 

•

Email Settings

 - enable configuring the SMTP server settings for e-mail 

communication of events.

•

Archival Schedule

 - enable configuring the archive schedule for the recordings.

•

Edge Sync Settings

: allows you to sync and back fill the recordings from camera SD 

card to NVR. You can configure when to sync or back fill.

•

Site Info

 - enable configuring and displaying the Site info and License type 

information.

•

Holiday/Exception Settings for Schedules

 - enable configuring the holidays and 

exceptions for schedule based recording.

To view the system settings

•

Click  the 

Configurator

 tab. The 

System

 page (

Figure 6-6

) appears by default.

Figure 6-6    System page

Configuring General Settings

The general settings enable configuring of the device address, device name, and device 
description for MAXPRO NVR.

Summary of Contents for MAXPRO NVR Hybrid PE









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands