C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
132
MAXPRO NVR 5.0 Installation and Configuration Guide
6
Note:
If Camera Type is OnCam Grandeye Fisheye (OnCam-GE-***-Fisheye), the 360
Settings tab does not display Enable Panamorph, Immervision settings and
shows Enable Dewarping, OnCam Grandeye settings.
•
Enable Panamorph
: Select the
Enable Panomorph
check box to enable the
Panomorph feature.
•
Mounting position
: Select the
Mounting Position
. You have three options to
choose from:
Wall, Ceiling
, and
Ground
.
•
Modes
: Select the
Mode
for the camera. The available modes are
PTZ Mode,
Quad Mode
, and
Perimeter Mode
. The default mode is
PTZ Mode
•
Lens ID
: Select the
Lens ID
for the camera. The supported lens ids from v3.5 or
later are
A0**V, A0IFV, A0NKV, A1UST
,
A8TRT, B0QQV, B4QQV, B5SST,
B6SST
and
B8QQT
. By default
AO**V
Lens
Caution:
Only Immervision certified camera models can support this feature
enabled. Before configuring this feature, please check whether your
camera has the Panomorph lens.
Note:
•
To view live video from Immervision certified cameras, Refer Video Viewing
Options from Immervision Enabled Cameras section in
MAXPRO NVR
Operator’s Guide
.
•
The recommended Aspect Ratio for Immervision Certified cameras is 4:3.
•
Enable Dewarping
: Select the
Enable Dewarping
check box to enable the
dewarping feature for OnCam Grandeye fisheye cameras.
•
Mounting position
: Select the
Mounting Position
. You have three options to
choose from:
Wall
,
Ceiling
, and
Ground
.
•
Modes
: Select the
Mode
for the camera. The available modes are
Virtual
camera view, Panorama 2x180 views, Panorama 1x360 view and Panorama
1x180 view
.
Note:
To view live video from OnCam Grandeye cameras, Refer Video Viewing Options
from OnCam Grandeye Cameras section in
MAXPRO NVR Operator’s Guide
.
Summary of Contents for MAXPRO NVR Hybrid PE
