Honeywell FSC-SM, Installation Manual, Page: 69 / 76

10/01 FSC Safety Manager Installation Guide 57
4.3 Configuration at TPS Universal Station,
Continued
Building FSC-SMM
data points
This subsection takes you through the general steps for FSC-SMM data
point configuration. To build FSC-SMM data points, you will need to
follow the steps listed in Table 4-4.
For more information refer to
Section 4 — Data Point Detailed
Description
in the
FSC Safety Manager Control Functions.
ATTENTION
Information on the definition of a specific parameter can
be provided to you online by pressing the [HELP] key for the parameter
you have selected.
Table 4-4 – FSC-SMM data point configuration procedure
Step Action
1 Once you are in the Process Point Building display, select the
FSC-SMM point type you wish to configure.
2
Enter and select the desired configuration scheme. Use the
[PAGE FWD] button on the operator keyboard to move to the next
configuration page as needed.
ATTENTION
Data entered should be based on the FSC-SM
Configuration Forms you have filled out.
3
Press the [F12 LOAD] key to load the data in the FSC-SM database.
4
Press the [F9 WLK BACK] key to return to the Process Point Building
display.
5 Repeat steps 1 to 4 for the next FSC-SMM data point type until all
point types are configured.
ATTENTION
FSC aliases must be configured before points can be
downloaded against given aliases.