Honeywell FSC-SM, Installation Manual

Page: 16 / 76

4 FSC Safety Manager Installation Guide 10/01
1.3 Move Preparation,
Continued
Checklist
Table 1-1 provides a checklist to be used when planning the movement of
FSC Safety Manager cabinets.
Table 1-1 – Move preparation checklist
Check Action Notes
1 Travel Route Chart the equipment's route of travel regarding:
•
loading doors — height and location,
•
elevators — size, capacity, and availability,
•
aisles — number, size, and layout,
•
doorways — number and size,
•
hallways — size, restrictions, and bends,
•
stairs and ramps — may require some type of
lifting, and
•
rigging of equipment — if needed.
2 Space Is there enough space to hold the equipment?
3
Floor Loading Will the floor in all areas be strong enough?
4 Power Distribution Check for proper transformer sizes, distribution
panels and sufficient outlets for support, test and
maintenance equipment.
5 Grounding Be sure that proper grounds are available.
6
Conduits and
Cable Trays Make sure that conduits and cable trays are
large enough and the proper type to
accommodate all of the required cables.
7
Environment Are lighting and other environmental
requirements adequate?
8
Security Provide security clearances for the installation
crew if it is not composed of regular employees.
9
Responsibilities Are all responsibilities clearly defined and
understood?
10
Communications At minimum, three conveniently located
telephones are needed for:
•
Honeywell Technical Assistance Center (TAC)
data terminal,
•
Honeywell TAC voice, and
•
Operator Emergency.
For additional information regarding actions described in the
Move Preparation Checklist, refer to SM02-550 —
TPS System Site
Planning Manual
in the Binder TPS 3020-1
System Site Planning-1.