Honeywell FSC-SM, Installation Manual, Page: 26 / 76

14 FSC Safety Manager Installation Guide 10/01
1.4 Unpacking and Placement,
Continued
Fork lift
The FSC-SM cabinet is moved by fork lift to the final location. Table 1-4
lists special considerations regarding the use of a fork lift to move the
equipment.
Table 1-4 – Fork lift considerations
Number Consideration
1 Move the equipment to the electronics room by fork lift; remove the
fork lift by placing the equipment onto the lumber pieces by 10 cm
(4 inches) as illustrated in Figure 1-9.
2
Tip the cabinet off the lumber and onto the floor; remove the lumber.
3
Manually move the cabinet to the exact final position.
Figure 1-9 – Placement of equipment onto lumber
Solid piece or combination
of lumber pieces to match skid
or pallet height (nail together).
Move cabinet onto the lumber.
Continued on next page