Honeywell ControlEdge 900 platform User Manual Download Page 23

Page: 23 / 192

Features

Keys

Revision 9

900 Control Station User Guide

May 2014

Keys

Unless otherwise noted, the membrane keys on the left side of the front panel always behave as described
here.

Press key

For this result

•

Programmable function

•

Programmable function

•

Print contents of the display to a .bmp file on CompactFlash.

•

Log off current user.

•

Go to next display. Works only after Back key was pressed.

•

Go to previous display.

•

Go to Home display. This is the default display upon startup. It
contains links to displays for viewing your HC900’s process.
See page 87.

•

Go to main menu. See page 15.

CompactFlash

CompactFlash socket is on the left side. Use CompactFlash card for:

•

storing data logs (.csv)

•

storing print screen images (.bmp)

•

loading image file (.sdi).

NOTE

: Maximum Compact Flash memeory size is 2GB, minimum Compact Flash size is 4MB.

Summary of Contents for ControlEdge 900 platform

































































































































































































Search results

Summary of Contents for ControlEdge 900 platform

Reviews:

Honeywell ControlEdge 900 platform, User Manual, Page: 23 / 192

Search results

Summary of Contents for ControlEdge 900 platform

Reviews: