LS10144-001SK-E
Network Management
6-8
7.
Select whether a Message or Tone Only should be played. If Message is selected, choose the desired mes-
sage for the command.
8.
Select the tone to be played between messages. (High-Lo, ANSI Whoop, Cont. Whoop, ANSI, March Code,
California, Steady, Alert Tone, or No Tones).
Note: 520Hz tones are available when using EVS-VCM, EVS-INT50W or EVS-100W AMP’s. These include ANSI
520, Temp 4 520, Steady 520. See Table A-6 for a list of compatible speakers.
9.
Select how many times you wish the message to repeat. (None, 1 - 14, or Continuous).
10. Select the initial delay time (0, 3, 4, 8, 12, 16, 20, 24, 28).
11. Select the inter message delay time (4 to 32 seconds, in 4 second increments).
12. Select Y or N to allow message to continue to play after Mic release.
13. Select Y or N to allow message to restart on a new activation.
Table 6-3 Voice Command Mapping
System Event
Fire Alarm
Fire System Aux 1
Fire System Aux 2
Fire Zone Aux 1
Fire Zone Aux 2
Fire Pre Alarm
Emergency Communication 1
Emergency Communication 2
Emergency Communication 3
Emergency Communication 4
Emergency Communication 5
Emergency Communication 6
Emergency Communication 7
Emergency Communication 8
Fire Supervisory
System Alert 1-5
Trouble
Fire Interlock Release
Fire Interlock Alert
Custom Emergency Comm
Emergency Supervisory
CO Alarm
CO Supervisory
