Model 6820 / 6820-EVS Installation Manual
LS10144-001SK-E
9-3
9.
Option settings are edited by pressing the up or down arrow.
9.2.2
Adding a Module
To add a new hardware module to the system, follow these steps:
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1.
Enter the installer code. The panel will automatically go the main menu.
2.
Select 7 for Program Menu.
3.
Press 1 to enter module menu.
4.
Press 2 to add a module.
5.
From the next screen, select the number that corresponds to choose a module type to add from the <New
Module Type> screen.
The screen will display “Adding module [#]...” for a few moments. You will be returned to the <New Mod-
ule Type> screen where you can add additional modules if desired.
You must save changes when you exit the Program Menu or the new module will not be added.
Note: If you Add a Module that has not been physically connected, the panel will go into trouble after it reinitial-
izes (when you exit the Program Menu). When the new module is attached, the trouble will correct itself
automatically.
9.2.3
Deleting a Module
To delete a module, follow these steps:
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1.
Enter the installer code. The panel will automatically go the main menu.
2.
Select 7 for Program Menu.
3.
Press 1 to enter module menu.
4.
Select module to be deleted.
5.
Press 3 to delete a module.
6.
A warning screen will display. If you want to proceed with deleting the module, select Yes. To cancel, select
No.
9.2.4
View Module List
To view a list of all modules, follow these steps:
1.
Enter the installer code. The panel will automatically go the main menu.
2.
Select 7 for Program Menu.
3.
Press 1 to enter module menu.
4.
Press 4 to view module list.
