Honda EU10iT1, Manual

Page: 93 / 138

10-4
dummyhead dummyhead
STARTING SYSTEM
ASSEMBLY
Pass the starter rope [1] through the rope hole [2] in the
reel and make an overhand knot at the rope end.
Wind the rope around the recoil starter reel [3] in the
direction of the arrow.
Set the hook [1] at the outer end of the recoil starter
spring [2] in the groove [3] in the starter reel [4].
Apply grease to the groove [1] of the recoil starter case
[2] and inner end [3] of the recoil starter spring [4].
Align the hook at the inner end of the recoil starter
spring with the groove in the case so that the hook sets
in the groove, and install the reel [5] in the case.
• Wear gloves and eye protection.
• During disassembly, take care not to allow the
return spring to come out from the spring cover.
[2]
15 – 20 mm (0.6 – 0.8 in)
[1]
[3]
[1]
[3]
[2]
[4]
[2]
[1]
[3]
[4]
[5]