Honda EU10iT1, Manual

Page: 18 / 138

2-3
dummyhead dummyhead
SERVICE INFORMATION
GENERATOR
TORQUE VALUES
ENGINE TORQUE VALUES
(*1): Apply oil to the threads and seating surface.
Valve guide Valve guide I.D. IN/EX
4.000 – 4.018 (0.1575 – 0.1582)
4.060
(0.1598)
Valve spring Free length IN/EX 23.7 (0.93) 22.8 (0.90)
Camshaft Cam height IN/EX
27.772 – 28.172 (1.0934 – 1.1091)
26.972
(1.0619)
Camshaft roller bearing I.D.
5.020 – 5.050 (0.1976 – 0.1988)
5.100
(0.2008)
Crankcase side cover Camshaft roller journal I.D.
5.000 – 5.018 (0.1968 – 0.1976)
5.050
(0.1988)
Valve lifter roller journal I.D.
5.000 – 5.018 (0.1968 – 0.1976)
5.050
(0.1988)
Camshaft roller O.D.
4.990 – 5.000 (0.1965 – 0.1969)
4.950
(0.1949)
Valve lifters Journal I.D.
5.005 – 5.025 (0.1970 – 0.2012)
5.050
(0.1988)
Valve lifter roller O.D.
4.990 – 5.000 (0.1965 – 0.1969)
4.950
(0.1949)
Rocker arms Journal I.D.
4.005 – 4.025 (0.1577 – 0.1585)
4.050
(0.1594)
Rocker arm roller O.D.
3.990 – 4.000 (0.1571 – 0.1575)
3.950
(0.1555)
Spark plug Gap 0.6 – 0.7 (0.024 – 0.028) –
Ignition coil Resistance Primary side 0.7 – 1.1 Ω –
Secondary
side
12 – 21 k Ω –
Spark plug cap resistance 7.5 – 12.5 k Ω –
Ignition pulse generator Air gap (at rotor) 0.4 – 0.6 (0.016 – 0.023) –
Resistance 28 – 36 Ω –
Carburetor Main jet #58 –
Float height 12.0 (0.47) –
Pilot screw opening 2-5/8 –
Part Item Standard
Service
limit
Part Item Terminals Standard
Service
limit
Stator
AC winding resistance
1 – 2 1.4 – 2.1 Ω –
1 – 3 1.4 – 2.1 Ω –
2 – 3 1.4 – 2.1 Ω –
Sub winding resistance 4 – 5 0.3 – 0.5 Ω –
DC winding resistance 3 – 4 0.1 – 0.2 Ω –
Exciter winding resistance 1 – 3 0.5 – 0.9 Ω –
Item Thread Dia. (mm)
Torque values
N·m kgf·m lbf·ft
Spark plug M10 x 1.0 11.8 1.2 9
Valve adjuster lock nut M5 x 0.5 5.5 0.56 4.1
Oil case bolt M5 x 0.8 7.3 0.74 5.4
Crankcase side cover bolt M5 x 0.8 7.3 0.74 5.4
Connecting rod bolt (*1) M5 x 0.8 5.9 0.6 4.4
Head cover bolt M5 x 0.8 5.9 0.6 4.4